ASI FS Series Fast Setting Cyanoacrylate Super Glue
About ASI FS Series Fast Setting Cyanoacrylate
The Adhesive Systems Inc (ASI) FS Series Cyanoacrylate is a fast setting instant super glue adhesive. The FS Series super glue is perfect for applications where low moisture conditions exist or a exceptionally fast fixture time is needed.
The FS Series Cyanoacrylates represents the latest technology in super glue technology. The FS Series cures exceptionally fast, in a matter of seconds or fractions of seconds.
Benefits of the FS Series Cyanoacrylates
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Super fast cure
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The FS Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
ASI FS Series Cyanoacrylates Specifications
Bond Performance
- Substrate Fixture Time Bond Strength
- Steel < 10 Seconds > 2100 psi
- Aluminum < 10 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 5 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 5 Seconds > 900 psi
- Phenolic < 10 Seconds > 850 psi
Properties
- Color: Clear
- Viscosity: 5
- Specific Gravity: 1.05
- Base: Modified Ethyl
Directions for Use
For optimum results parts should be clean and free from any
contamination on the bonding surface. If parts do not mate flush
together use a higher viscosity product to compensate for the
gap. Any excess adhesive can be removed using Remove
Debonder.
Additional Information on the FS Series
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| FS 5 | 0.002 | 5 cps | 2700/4200 | -65 to+200° F | <2.5 Sec/4 Hours | Type II, Class 1 |
| FS 30 | 0.003 | 30 cps | 2700/4200 | -65 to+200° F | <2.5 Sec/4 Hours | Type II, Class 1 |
| FS 100 | 0.006 | 100 cps | 2700/4200 | -65 to+200° F | <5 Sec/4 Hours | Type II, Class 2 |
| FS 500 | 0.007 | 500 cps | 2700/4200 | -65 to+200° F | <5 Sec/4 Hours | Type II, Class 2 |
| FS 1000 | 0.008 | 1,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS 1500 | 0.008 | 1,500 cps | 2700/4200 | -65 to+200° F | <7.5 sec/4 Hours | Type II, Class 3 |
| FS 2000 | 0.008 | 2,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS 3200 | 0.008 | 3,200 cps | 2700/4200 | -65 to+200° F | <7.5 Sec 4 Hours | Type II, Class 3 |
| FS 4000 | 0.008 | 4,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS Gel | 0.01 | Gel | 2700/4200 | -65 to+200° F | <12.5 Sec/4 Hours | Type II, Class 3 |
ASI FS Series Technical Data Sheets
Original: $452.00
-65%$452.00
$158.20Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
About ASI FS Series Fast Setting Cyanoacrylate
The Adhesive Systems Inc (ASI) FS Series Cyanoacrylate is a fast setting instant super glue adhesive. The FS Series super glue is perfect for applications where low moisture conditions exist or a exceptionally fast fixture time is needed.
The FS Series Cyanoacrylates represents the latest technology in super glue technology. The FS Series cures exceptionally fast, in a matter of seconds or fractions of seconds.
Benefits of the FS Series Cyanoacrylates
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Super fast cure
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The FS Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
ASI FS Series Cyanoacrylates Specifications
Bond Performance
- Substrate Fixture Time Bond Strength
- Steel < 10 Seconds > 2100 psi
- Aluminum < 10 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 5 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 5 Seconds > 900 psi
- Phenolic < 10 Seconds > 850 psi
Properties
- Color: Clear
- Viscosity: 5
- Specific Gravity: 1.05
- Base: Modified Ethyl
Directions for Use
For optimum results parts should be clean and free from any
contamination on the bonding surface. If parts do not mate flush
together use a higher viscosity product to compensate for the
gap. Any excess adhesive can be removed using Remove
Debonder.
Additional Information on the FS Series
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| FS 5 | 0.002 | 5 cps | 2700/4200 | -65 to+200° F | <2.5 Sec/4 Hours | Type II, Class 1 |
| FS 30 | 0.003 | 30 cps | 2700/4200 | -65 to+200° F | <2.5 Sec/4 Hours | Type II, Class 1 |
| FS 100 | 0.006 | 100 cps | 2700/4200 | -65 to+200° F | <5 Sec/4 Hours | Type II, Class 2 |
| FS 500 | 0.007 | 500 cps | 2700/4200 | -65 to+200° F | <5 Sec/4 Hours | Type II, Class 2 |
| FS 1000 | 0.008 | 1,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS 1500 | 0.008 | 1,500 cps | 2700/4200 | -65 to+200° F | <7.5 sec/4 Hours | Type II, Class 3 |
| FS 2000 | 0.008 | 2,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS 3200 | 0.008 | 3,200 cps | 2700/4200 | -65 to+200° F | <7.5 Sec 4 Hours | Type II, Class 3 |
| FS 4000 | 0.008 | 4,000 cps | 2700/4200 | -65 to+200° F | <7.5 Sec/4 Hours | Type II, Class 3 |
| FS Gel | 0.01 | Gel | 2700/4200 | -65 to+200° F | <12.5 Sec/4 Hours | Type II, Class 3 |
